Chrome Stainless
<<  Page 12 of 229  >>
Index
ABS PRODUCTS
NUT & BOLT COVERS
HUB & HUBDOMETER CAPS
AXLE COVERS
WHEEL COVERS
SIMULATORS
MUD FLAP ACCESSORIES
LICENSE PLATE ACCESSORIES
DECORATIVE HARDWARE
BUMPER GUIDES
AIR HORNS
FANS
HYDRAULIC BOTTLE JACKS
ELECTRICAL ACCESSORIES
MISCELLANEOUS ACCESSORIES
GRILLES
CLASSIC/XL ACCESSORIES
CASCADIA ACCESSORIES
COLUMBIA ACCESSORIES
CORONADO ACCESSORIES
CENTURY CLASS ACCESSORIES
SEVERE DUTY/FLD-112/120 & M2 BUSINESS CLASS
DISPLAYS
CROSS-REFERENCE
ABS PRODUCTS
INSTALLATION INSTRUCTIONS
TWIST-ON
PUSH-ON
INSTALLATION
INSTALLATION
Place the rim protector, followed by the ABS
Remove two lug nuts from the wheel, on
hub cover over the existing lug nuts. Holding
opposite sides. Place the rim protector,
the ABS hub cover flush with the face of the
followed by the ABS axle cover over the
wheel, twist the ABS nut covers onto the
existing lug nuts. Replace the two lug nuts
exposed studs until tight. A light clicking
removed earlier, using the supplied locking
sound will indicate that the locking action is
washers to secure the axle cover to the
working, which will secure the lug nut covers
wheel. Torque the nuts as usual to complete
in place.
installation.
Lug nut removal is not required.